Road Roller
Model: CDM521J
CDM521J road roller is a tri-drum static roller with maximum operating weight of 21 tons. This road roller is a kind of engineering vehicle featured in big linear load per unit and can be used to compact the road surface composed of detritus, gravel, cinder, asphalt concrete and so on. Our CDM521J road roller is widely used in road construction, municipal project, road embankment filling, etc.Features of CDM521J Road Roller:
1. This road roller uses powerful Yuchai water cooled engine YC6108G.
2. Rear drum drive, transmission with synchronizer, flexible shaft control.
3. Articulated frames provide good maneuverability and eliminate the transverse shearing force
4. Hand brake and foot brake are available for better safety.
5. Wide-view cab with front and rear lighting for night operation.
6. Power-operated watering system for CDM521J road roller, with imported watering pump and big water tank.
7. Parted engine hood with air-spring-aided opening for easy maintenance
8. Air conditioning and heating system provide good environment for operator.
Specifications of CDM521J Road Roller:
| Operating weight(kg) | 18000(without load)/21000(with load) |
| Transportation dimension | |
| Length×width×height(mm) | 5990×2335×3490(with A/C) |
| 5990×2335×3300(without A/C | |
| Weight burden on front drum(kg) | 7500 |
| Weight burden on rear wheel(kg) | 10500 |
| Drive static linear pressure (N/cm) | 860(without load)/980(with load) |
| Front drum static linear pressure (N/cm) | 460(without load)/565( with load ) |
| Compacting thickness(mm) | 2322 |
| Min. turning radius(mm) | 7000 |
| Grade ability(%) | 20 |
| Travel speed | |
| Ⅰ | 2.2(km/h) |
| Ⅱ | 4.5(km/h) |
| Ⅲ | 9 (km/h) |
Engine specifications of CDM521J Road Roller
| Model | YC6108G |
| Type | In-line, water-cooled, four stroke, direct injection |
| Rated power(kw)/ RPM (r/min) | 85/2000 |
| Max. torque(N·m)/RPM (r/min) | 450/1400~1600 |
| Min. fuel consumption (g/kw·h) | 235 |
| Total displacement (L) | 6.871 |
| Starter motor power (kw) | 6.6 |
| Starter motor voltage (V) | 24 |
| Injection pump | 6AD95 |
| Fuel tank capacity (L) | 230 |
Axle
| Final drive type | Spiral bevel gear one stage deceleration |
| Speed reduction ratio | 6.1667:1 |
| Wheel hub reduction | |
| Type | spur gear planet drive |
| Speed reducing ratio | 4.4:1 |
Brake system of CDM521J Road Roller
| Service brake | Air-over-oil disc brake on rear axle |
| Parking brake | Manual operated brake on transmission |
Steering system
| Type | Full hydraulic steering system |
| System operating pressure | 14Mpa |
A/C System
| Model | TY40A |
| Refrigerating capacity | 4600W |
Note: The specification is subject to change for the modification without notice.

English
Español
Français
العربية
Русский
Português



